DIY Paintless Dent Dings Repair Lifter Tools Kit For Car Doors

Hail damage, door dings, and other cosmetic damages are quickly massaged out with this extensive paint-less dent repair kit. This kit has been specially designed to fit in confined spaces where a typical hammer and dolly won’t reach.

Not only utilized for car dent removal, but also for motorcycles, refrigerators, washing machines, metal cabinet doors etc.

Instructions for use:

• Clean the dent with a clean wet cloth.
• Mount the glue stick into a glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes.
• Use a proper drawing gasket. Large dent requires a large drawing gasket.
• Pull the trigger and apply the drawing gasket with extruded glue.
• Fast place the drawing gasket with hot melted glue at the center of dent, press lightly until the glue cures.
• Align the T-shaped repairer and press the drawing gasket with hot melted glue, pull the sliding rod backwards to pull up the dent.
• Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen.
• Clean the repaired place with a clean wet cloth.

 What's in the box

• 1 x 2 in 1 Puller
• 1 x Puller Connector
• 4 x Aluminium Alloy
• 3 x Glue Sticks (11mm x 270mm)
• 1 x Towel
• 2 x Shovels